| PART |
Description |
Maker |
| DS1815R-10TR DS1815R-10-U DS1815R-20TR DS1815R-20- |
3.3V EconoReset with Push-Pull Output
|
MAXIM - Dallas Semiconductor
|
| DS3687H DS3687J-8/A DS3687N-8/B DS3687H/A DS3687N- |
Dual Peripheral Driver
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.6V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.3V, Timeout: 20ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 2.0V, Timeout: 100ms, SOT23 3-pin
µP Supervisory, Push/Pull Active-Low, TH: 1.8V, Timeout: 100ms, SOT23 3-pin 双外围驱动器
|
KEMET Corporation
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| 804-001-06 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| 804-001 |
Push-Pull Mighty Mouse
|
Glenair, Inc.
|
| AG606 AG606-G AG606-PCB |
Push-Pull CATV Amplifier
|
WJ Communication. Inc.
|
| L293B03 |
PUSH-PULL FOUR CHANNEL DRIVERS
|
STMicroelectronics
|
| AG606 AG606-G AG606-PCB |
Push-Pull CATV Amplifier
|
Electronic Theatre Controls, Inc.
List of Unclassifed Manufacturers
|
| S8740200P |
GaAs Push Pull Hybrid
|
PDI
|
| SGM8704 |
Push-Pull Output Comparator
|
Shengbang Microelectron...
|
|
